Plumbing Service in Chandler, AZ
AZ Emergency Plumbing has been a trusted name in the Chandler community since the day we opened for business. Our locally owned and operated company has worked hard to earn and maintain an impeccable reputation as the region’s most trustworthy and dependable plumbing company. You can have complete peace of mind in our work, as our company is fully licensed, insured, and bonded. Our team consists of dedicated, honest, and experienced professionals who are ready to go above and beyond for each and every customer. Whether you need basic residential plumbing, have an extensive project in mind, or need emergency assistance, we would be delighted to assist you. Contact AZ Emergency Plumbing without delay to join our extensive list of satisfied customers!
Tips and Facts from Our Plumbing Service in Chandler, Arizona
Gas Piping Services
Six Most Common Gas Piping Materials
Galvanized Steel is a robust and energy-efficient piping option that’s widely used for water supply and gas lines both inside and outside buildings. Because installing this material takes more effort than other options require, it has been largely discontinued for new construction projects and is commonly found in older properties instead.
PVC is considered a solid option for underground outdoor gas lines due to its resistance to corrosion and strong durability. These budget-friendly pipes are commonly used by plumbers, but their use is prohibited in certain places because they can easily break during installation.
Copper pipes are often limited by rigorous code requirements that reduce their usability in many local jurisdictions, and they generally last about 20 years. In fact, some municipalities have fully banned copper installations.
Black Iron remains the top choice for gas piping materials in both outdoor and indoor installations. With high durability, strong resistance to heat, and solid construction, it creates a tight, sealed system. However, black iron naturally corrodes over time, and its sealant tends to weaken and degrade. If your gas lines are made of black iron, consistent maintenance is necessary.
Flexible Corrugated Stainless Steel Tubing provides a practical solution for restricted spaces or regions with frequent seismic activity or similar hazards. Its flexible design and ease of installation are advantages, but its vulnerability to cracking makes it appropriate only for indoor gas line setups.
HDPE performs similarly to PVC, making it a reliable material for underground exterior piping applications. These plastic-based lines are flexible, lightweight, and an economical solution. Unfortunately, they can be compromised by obstacles underground, such as growing tree roots or jagged rocks.
How Gas Piping Systems Work
Pressure is the driving force behind gas piping systems that bring natural gas to a building. Inside these systems, gas flows along interconnected pipelines, moving from zones of higher pressure to lower, passing through a pressure regulator, feeding into your property’s distribution setup, and ultimately reaching your interior appliances. The natural gas begins its journey at the mainlines and then travels through a service line, with both components maintained by the gas utility provider. Any portion of the system that lies beyond this, including pipes and valves on your land, becomes your responsibility to maintain and repair. When a gas appliance such as a furnace or stove is activated, the gas pressure rises just enough above the atmospheric level to initiate ignition.
Whole Home Water Filtration
Benefits
There are numerous advantages to installing a whole-house water filtration system in your home. It gives you easy access to pure, refreshing water that tastes great while removing the worry of pollutants and impurities being present. You’ll cut back on plastic bottle usage and save money by no longer purchasing bottled water for everyday use. The system also works to reduce common plumbing troubles by minimizing the buildup of limescale and various minerals that could damage your pipes. After making the switch, your clothes will come out of the laundry feeling cleaner and softer, you’ll use less soap, and your skin will thank you for the reduction in chemical exposure. As a whole, whole-house filtration offers long-term value, personal comfort, and a meaningful environmental benefit.
The Filtration Process
Most households receive water through a centralized city system. At the treatment plant, water goes through multiple stages, including sediment removal, carbon filtration using copper-zinc KDF media, and a post-filtration process for safety and quality enhancement. Filters installed at home then work to remove herbicides, PFOS, PFOA, heavy metals, contaminants, pesticides, and hard minerals. Using filtered water benefits personal health and also helps protect plumbing fixtures, household appliances, and faucets from long-term damage.
Got Low Water Pressure?
The problem might be the result of…
…a failing pressure regulator. Some homes may not have pressure regulators installed. However, if your property does feature one, you can apply a water pressure gauge to measure the precise pressure levels you are receiving. If the reading from your gauge is below the appropriate range, it’s a strong indication that the pressure regulator itself has failed. A missing or zero reading on the gauge can likewise be a warning sign. Collaborating with a plumber will make it easy to troubleshoot and replace the pressure regulator if that proves necessary.
…local regulations have changed. Unexpected modifications in water regulations can happen, requiring water suppliers to adjust their practices and comply promptly. If it turns out that your city has enacted such changes, it would be beneficial to discuss with your plumber the possibility of installing a water pressure booster. Before the booster system is professionally installed, we will perform a comprehensive inspection of your plumbing to exclude any other potential issues.
…a faulty fixture. If all fixtures throughout your home show signs of reduced water pressure, the problem is probably not the fixtures themselves. On the other hand, if low pressure is isolated to only one faucet, the fixture itself may be causing it, possibly because of a clog, mineral buildup, or because the fixture has to be replaced altogether.
…leaky pipes. Leaks come in various shapes and sizes, and they divert water flow, resulting in less water reaching where it’s needed. Check your property carefully for wet areas or pools of water, and be sure to reach out to AZ Emergency Plumbing as soon as possible to fix the problem before it becomes a costly and difficult situation.
…your main house shutoff valve or water meter valve being partially closed. The water meter valve, which is the property of the local water utility, plays a critical role in controlling the amount of water entering your property. Typically, the main shutoff valve for your home can be found close to where the city’s supply pipe connects to your plumbing system inside your house. If either of these valves is not completely open, it can significantly reduce your water pressure. After confirming that your home’s main shutoff valve is fully open, you should reach out to your municipal water provider and ask them to inspect the water meter valve for any issues.
…corroded pipes. Corrosion is a common issue in older pipes, but only a qualified plumbing technician can accurately determine if it’s present. If your plumbing system contains brass pipes that have been in place for more than 40 years, galvanized steel pipes that are over 20 years old, or copper pipes older than 50 years, corrosion is probably the source of your problem.
…a problem with your water supplier. If other homes or commercial properties close to you have the same pressure problem, then the water supply could be responsible. When this happens, get in touch with the utility company and inform them that this concern is shared by you and the nearby community.
All About Hydro Jetting
With hydro jetting, a specially engineered hose is used to blast high-pressure water into the plumbing to remove stubborn buildup. We start this non-invasive process by inspecting your pipes with a video camera, which helps us determine whether there is damage that would interfere with hydro jetting effectiveness. If there’s no visible damage, the hose is inserted into the line and secured to a professional-grade water tank. The entry point for the hose must be chosen carefully before the process can proceed.
By combining pressurized water, a high-strength hose, and the natural force of gravity, we can flush debris from the plumbing system using backward-facing jets to drive the nozzle forward and a single forward-facing jet to dislodge buildup at a powerful rate of roughly 20 gallons per minute. In addition to clogs, hydro jetting also clears mineral scale, grease buildup, invasive tree roots, and several other materials that may create future plumbing concerns. For deep or particularly stubborn clogs, this is the method most often suggested by professional plumbing companies you can count on.
Got Leaky Pipes?
The problem could be caused by…
…ground movement. Natural occurrences like floods and earthquakes cause the ground beneath to move and shift, which can result in pipes twisting, cracking, bending, or separating. When leaks appear underground, you might experience slow drainage or issues with water delivery in your home. A trained plumber is the only individual capable of inspecting your pipes and determining whether this damage has occurred.
…intrusive tree roots. The root systems of trees are highly intricate and can spread extensively below the surface and throughout the soil, which often causes them to penetrate water pipes with ease. If you observe trees growing close to your house, notice a sharp decline in water pressure, find wet spots scattered across your property, or detect a sinkhole forming in your yard, your trusted plumber should conduct a thorough inspection.
…improperly laid pipes. If your plumbing wasn’t installed by a certified professional or if the work lacked proper technique, you could face major emergency leaks in your pipes. The effects of gravity combined with water flow require that all pipes and fittings be carefully and accurately positioned. A knowledgeable technician from AZ Emergency Plumbing will inspect your system to verify whether everything was installed according to best practices.
…high water pressure. Pipes are built to last, but excessive water pressure can still cause them to leak over time. If water pressure rises beyond 60 psi, it may lead to pipes bursting unexpectedly. When you don’t know what’s triggering a leak, your plumber will perform a pressure test during their comprehensive inspection.
…pipe joint damage. Because pipe joints are made from several interconnected pieces and constantly have water flowing through them, they are especially vulnerable to damage. Damage may arise from aging, temperature extremes, or excessive water pressure within the plumbing system. If you detect ticking or banging noises – especially those heard when running hot water – the likely cause is a damaged or failing pipe joint.
…clogged lines. Obstructions in gutter debris, chemical residue, excess hair, blockages in air handler drain pans, along with many other possible reasons, can all contribute to clog formation. If your drains are slow or stopped up, toilets are overflowing, or pipes burst while unfrozen, it’s likely there is a major clog somewhere in the plumbing lines.
…a crack in a plumbing fixture. Generally, physical impact leads to this kind of problem. When the leak stems from this, it’s common to see obvious damage on the pipes or the fixture itself.
…corrosion. A plumbing system involves multiple elements that break down or wear out as time goes by. Rust and other corrosive agents (sometimes caused by mineral deposits or an incorrect pH balance) gradually compromise pipes and cause leaks to appear. Galvanized steel pipes typically last around twenty years, but brass pipes are far more durable and can last up to seventy years. If your water smells unpleasant, tastes bad, or appears discolored, it’s a strong sign that corrosion could be present in your plumbing.
…loose water connectors. Movement or shifting can cause the hoses and pipes connecting appliances to water supplies to loosen, leading to leaks that may go unnoticed at first. These connections might also suffer damage, and common signs include water pooling near the appliance or leaking from the supply line.
…a broken seal. During appliance installation, contractors use rubber sealant along all connection points to maintain watertightness. However, as the sealant ages and deteriorates, you might begin to observe water puddles near your appliance or condensation accumulating on it as clear signs of a failing seal.
How We Install a Garbage Disposal
- Turn off the circuit breaker and carefully complete all the electrical wiring connections required for the disposal installation.
- Install the drain flange securely in place to prepare for mounting the unit.
- Install both the gasket and the mounting ring to create a proper seal.
- Prop the disposal up and mount it onto the flange assembly carefully.
- Use pipe connectors to connect the P-trap discharge pipe to the disposal outlet firmly.
- Tighten all fasteners on the plumbing and mounting connections, then test for leaks by running water and operating the disposal.
Got Kitchen Problems?
If the issue is a…
…water leak on the cabinet below your sink, the source is most likely a leak at the drain pipe joint. We have also seen this issue caused by malfunctioning faucet water supply connections. Many modern kitchen faucets utilize flexible hoses that connect the faucet to the water supply lines. Since the fittings are usually tightened manually, human error can contribute to leaks. If seals or caulking are damaged or failing, splashed water can also find its way into the cabinet beneath the sink.
…slow sink drain, a buildup of grease, soap scum, food particles, or another stuck object is probably blocking the pipe. To remove this kind of clog, our plumbing specialists often have to open the drain trap and use a snake tool to clear the blockage.
…dripping kitchen faucet, the cartridge may require replacement to stop the leak. Contemporary kitchen faucets typically use a single-valve cartridge that manages the flow of both cold and hot water. Swapping out this component generally resolves the dripping issue.
Got Shower Problems?
If the issue is a…
…smelly shower drain, you might be dealing with an issue related to mold, bacteria, or sewage gas buildup. If the odor originates from a shower in a guest bathroom that is seldom used, the problem might be a dry P-trap allowing gas to leak into the room. Your trusted plumber can swiftly detect and resolve this frustrating situation.
…clogged shower drain, typical causes are hair caught in the drain, mineral deposits, soap scum, foreign objects stuck inside the pipes, or even a broken pipe causing an obstruction. It’s best to avoid drain cleaners because their harsh chemicals often cause damage that outweighs the clog itself. When a plastic drain cleaning tool fails to fix the problem, our Chandler plumbing company has the professional equipment and expertise to remove the clog efficiently and safely.
…dripping shower head, the reason is probably a faulty gasket or an accumulation of minerals on the head. The minerals in hard water, such as lime, silica, calcium, and magnesium, are responsible for causing buildup that leads to dripping. You can detect mineral buildup by looking for white lines or residue around the base of the shower head. While soaking the head in vinegar often helps resolve the issue, if the drip persists or you require help with gasket replacement, we are ready to assist you promptly.
Got Bathroom Sink Problems?
If the issue is a…
…rotten egg-like odor coming from your sink, you likely have a microbial infection in the drain or sink overflow passage. These problems can typically be treated easily using 3% hydrogen peroxide. If the problem continues, reach out to AZ Emergency Plumbing and ask about our plumbing services.
…deteriorated sink caulking, it’s likely due to water damage over time. Caulking may peel, crack, mold, or mildew from constant moisture exposure. Replacing caulking every five years is advisable.
…malfunctioning drain stopper, the problem may be due to damage. This piece controls the opening and closing of the drain when the faucet knob is pulled, but the retaining nut on the horizontal pivot rod can sometimes come loose over time.
…slow or clogged drain, it could be due to the presence of hair, old soap deposits, or other common buildup. Take a look at the horizontal pivot rod below the drain opening if your sink has a mechanical stopper, as this spot often traps debris. If the blockage isn’t located there, get in touch with us for repairs and troubleshooting.
…dripping faucet, the culprit might be corrosion, aging parts, or a worn-out washer, o-ring, or valve seat that needs replacing. Our plumbers near you will inspect the faucet, pinpoint the exact issue, and restore proper functionality to your sink right away.
Toilet Installation
When you hire our Chandler plumbing service to install a new toilet, our first action is to take out your old toilet with care. Then, we examine the flange closely, replace the wax ring, and correctly position the new toilet in place. The toilet is fastened securely with bolts, after which the tank, seat, and lid are installed properly. Leak tests are performed once everything is in place to confirm there are no leaks. Special toilets, including those mounted on the wall, with bidets, or with electrical features such as heated seats, will require a more involved installation process.
Our plumbers near you can install all toilets, including:
Wall-Hanging
Two-Piece
One-Piece
Waterless
Double-Cyclone
Dual-Flush
Gravity-Fed
Pressure-Assisted
Comfort-Height
And More!
Got Toilet Problems?
If the issue is a…
…toilet overflow, be sure to get in touch with our plumbing service as soon as possible. This problem is often caused by a clogged vent pipe, an issue with your sewer line, an overfilled septic tank, or a blocked pipe in the plumbing system. Most toilet setups include a valve on the pipe that feeds into the tank, and turning it off can stop the flow. If your setup doesn’t include a visible valve, turn off your main water supply. Keep the valve or supply turned off until we’ve corrected the issue.
…leak at the toilet base, the underlying problem is often a wax ring that’s worn, not seated correctly, or otherwise damaged. Water may appear suddenly right after flushing or may slowly build up during the day. The plumbing repair needed for this involves draining the toilet tank, disconnecting and removing the toilet, and installing a brand-new ring. In more serious cases, we may recommend replacing the toilet and tank, based on the condition of both.
…tank-to-toilet leak, expect to see water dripping from the spot where the bowl and tank meet. When this occurs, your plumber must drain the tank completely, take it off the bowl, and install a new gasket in its place.
…leaking water supply, watch for warning signs like loud pipe noises, higher-than-normal water bills, still water around your property, or noticeably weaker water pressure. Small leaks don’t stay small for long, so after you’ve turned off your main supply, don’t delay in contacting us for professional plumber services.
…toilet that won’t stop running, a leak at the flush valve located at the bottom of the tank might be the issue. Another possibility is a malfunctioning or misaligned fill valve, which continuously allows water to refill the tank.
…clogged or slow-flushing toilet, using a plunger is a good place to start. If you’re unable to clear the blockage with a plunger, your Chandler plumbing contractor can come out and use a drain snake to get things moving again. A buildup of rust, debris, calcium, and/or lime inside older toilets can create a weak or “lazy” flushing action. If this buildup turns out to be the plumbing problem, we’ll likely recommend replacing your current toilet.
All About Frozen Pipes
What to Do When Your Pipes Freeze
The very first thing you should do if your pipes freeze is turn off the main water supply valve without delay. After that, you have the choice of either thawing the pipes on your own or calling your reliable local plumbers to handle the problem. If you suspect the water meter is frozen, never try to thaw it yourself, since this could result in major damage. Instead, call your water company directly. Being proactive by contacting your trusted plumber at AZ Emergency Plumbing as soon as frozen pipes appear is the smartest way to avoid expensive repairs, cracked pipes, or pipe bursts.
How to Thaw Frozen Pipes
- Speak with your neighbors and ask if they’ve noticed frozen pipes in their homes. If several people are having the same problem, a broken water main may be the real cause instead of a localized issue at your house.
- Immediately shut off the water using your main shutoff valve.
- Turn on every faucet to help reduce pressure buildup.
- Thaw pipes with a hair dryer, avoiding materials that could ignite under heat.
- Restore water slowly at the main and inspect for signs of leaks or damage.
If you’re not able to thaw the pipes using this approach, feel uneasy about doing it yourself, or suspect that a pipe has burst or cracked, call your trusted 24/7 plumber right away at 480-547-9517. Trying to thaw pipes on your own can result in many problems, including melting or cracking (from using too much or too rapid heat), water damage (if a leak or split goes undetected), and several other complications. Your emergency plumber will arrive at your location promptly and take care of the issue by thawing or repairing your pipes as quickly and safely as possible.
How Our Insured Plumbers Insulate Pipes
Your local plumbers in Chandler will begin by identifying the best pipe insulation strategy, since every plumbing system is different. This typically includes adding insulation around piping located in crawl spaces, attic areas without heat, or exterior-facing walls. Heat cables or heat tape may also be recommended, depending on what we find during the evaluation of your particular plumbing configuration.
How to Prevent Frozen Pipes
You can help prevent frozen pipes and resulting complications, including leaking pipes or pipe bursts, with a bit of proactive preventative action.
We suggest:
Before temperatures drop, shut off outdoor spigots and drain water from lines
Keep under-sink cabinet doors open to keep pipes warm
Ask your plumbing contractor to insulate your water tank and pipes
Run your faucets regularly
Drip cold water in the faucet farthest from the main valve to keep water moving
Keeping your heater on (55 degrees or higher)
Where and When Pipes Typically Freeze
You’re most likely to find frozen pipes in areas like exterior walls, crawl spaces, and attics. Freezing can start when the temperature hits 32 degrees, but becomes far more dangerous when temperatures drop below 20 degrees. The longer temperatures remain low, the higher the odds of a pipe bursting. It only takes six hours for water in pipes to freeze solid.
Five Most Common Plumbing Pipe Materials
CPVC Piping, also known as chlorinated polyvinyl chloride piping, is manufactured from a durable polymer that has certain advantages over copper. It’s quicker to install and resists corrosion far more effectively. Still, there are tradeoffs – for instance, CPVC can crack due to brittleness, costs nearly twice as much as regular PVC, isn’t a great choice for areas with major temperature swings, and doesn’t hold up to high heat as well as copper piping.
Cast Iron Piping is often found in homes built in the 1970s and 1980s, when it was the preferred material for sewer and waste drainage. It became widely used due to its resistance to wear, durability, and long-standing reputation for reliability. Nowadays, it is avoided because it contributes to sewer issues, corrodes, breaks down gradually, weighs too much, and causes costly damage that’s often not covered by standard homeowners insurance policies.
Copper Piping is a reliable material that’s often preferred for various home water line needs. Known for its safety, strength, and cutability, it’s typically found connected to tubs, sinks, and showers in both new construction and renovations. One drawback is that copper piping is generally more expensive than other available piping types.
PVC Piping is among the most widely installed materials today when it comes to handling waste flow. Because it’s more affordable and longer-lasting than galvanized steel, it’s a common choice in the industry. However, it’s not suitable for high-pressure water use.
PEX Piping has become a popular option in the plumbing industry due to its resilience, flexibility, budget-friendly price point, strong composition, and ability to bend without breaking or needing numerous fittings. Because of these qualities and its adaptability across many different plumbing applications, most licensed plumbers tend to choose PEX piping whenever possible. Red PEX is typically designated for hot water lines, white is compatible with both hot and cold water systems, and blue is used for cold water.
To learn more about our premier plumbing services or to dispatch us for emergency plumbing assistance, reach out to AZ Emergency Plumbing today at 480-547-9517.
