Plumbing Service in Gold Canyon, AZ
AZ Emergency Plumbing is dedicated to proudly and humbly serving our Gold Canyon neighbors. Our locally owned and operated business has earned an exceptional reputation as the most reliable and trustworthy plumbing company in the area. Your confidence in our services is well-placed, as we are fully insured, licensed, and bonded. Our team includes seasoned, diligent, and honest professionals who are enthusiastic about exceeding our customers’ expectations. We find joy in assisting you, whether you require emergency assistance or regularly-scheduled residential plumbing. Reach out to AZ Emergency Plumbing today and allow us to add you to our growing list of loyal and satisfied customers!
Tips and Facts from Our Plumbing Service in Gold Canyon, Arizona
Got Bathroom Sink Problems?
If the issue is a…
…deteriorated sink caulking, the damage probably results from water exposure. Over time, water can cause caulking to peel, mold, mildew, or crack. Caulking should be replaced every five years to maintain integrity.
…dripping faucet, problems like a failing o-ring, corrosion, an old washer, or damage to the valve seat might be responsible. Once our plumbers near you locate the issue, they’ll get your sink functioning the way it should in no time at all.
…slow or clogged drain, there might be a buildup of soap scum, tangled hair, or product gunk. If the drain is connected to a mechanical stopper, it’s worth checking the pivot rod just under the drain to see if blockage has developed there. When the problem appears unrelated to that part, let us handle the additional troubleshooting and needed repair.
…malfunctioning drain stopper, the culprit may be a faulty part. The stopper opens and closes the drain via the faucet knob, but a typical issue with this setup is the loosening of the horizontal pivot rod’s retaining nut underneath the fixture.
…rotten egg-like odor coming from your sink, the cause is probably a microbial infection located in the sink’s overflow passage or drain. This is usually treatable with 3% hydrogen peroxide. If the odor continues, contact AZ Emergency Plumbing to ask about our broad range of plumbing services.
All About Hydro Jetting
The hydro jetting process uses a unique hose that shoots pressurized water through the plumbing to dislodge buildup. The first step in this minimally invasive procedure is always a camera inspection to spot any damage that might prevent us from using hydro jetting to clear the clog safely. Once we verify the lines are sound, the hose is inserted into your system and connected to a dedicated water tank. The correct insertion point must be carefully selected before placing the hose and starting the water flow.
High-pressure water at a rate of twenty gallons per minute moves through rear-facing jets, pushing the nozzle ahead while a single front-facing jet breaks up blockages, with help from a heavy-duty hose and the natural pull of gravity. More than just a method for clearing clogs, hydro jetting also removes tree roots, greasy buildup, mineral scaling, and a wide array of debris that can cause future blockages or drainage issues. For deeper clogs that aren’t accessible using traditional means, this technique will typically be advised by any dependable and experienced plumbing company.
Got Shower Problems?
If the issue is a…
…clogged shower drain, the likely cause is soap scum buildup, mineral deposits, hair clogs, a foreign object lodged in the drain, or a broken pipe somewhere in the system. Using chemical drain cleaners might seem convenient but can lead to problems far worse than a clogged drain alone. If a plastic drain cleaning tool doesn’t resolve the issue, you should reach out to our Gold Canyon plumbing company, where we utilize professional-grade equipment to clear stubborn blockages.
…dripping shower head, the issue is likely caused by mineral deposits on the head or a gasket that has worn out over time. Hard water contains minerals such as lime, calcium, magnesium, and silica that build up gradually and cause these deposits. You can often notice mineral buildup by spotting white residue or lines around the edges of the shower head. Soaking the shower head in vinegar may dissolve the minerals, but if the dripping continues or you need help replacing a faulty gasket, our team is ready to assist.
…smelly shower drain, the problem is likely caused by mold, bacteria buildup, or escaping sewage gas. When this foul smell is detected in a guest bathroom that rarely sees regular use, the P-trap in the shower drain may have dried out and is allowing gases to enter the room. Your skilled plumber can promptly identify and fix this troublesome issue.
Gas Piping Services
Six Most Common Gas Piping Materials
Galvanized Steel offers a durable and energy-efficient solution often utilized in water supply piping or for both exterior and interior gas line applications. Due to the increased labor required for installation, this material has fallen out of favor for new construction projects and is generally limited to older existing structures.
HDPE shares many qualities with PVC, particularly when it comes to underground exterior pipeline use. Plastic in construction, these lines are not only flexible, but also low in cost. The downside is their vulnerability to threats like rocks or invasive root systems beneath the soil.
Black Iron has long been the material of choice for gas piping in both indoor and outdoor locations. It’s known for being heat-resistant, incredibly tough, and structurally durable, forming an airtight seal under normal conditions. As time progresses, though, black iron is prone to corrosion, and its sealant often fails. If black iron piping is installed, regular professional maintenance is recommended.
PVC makes a great choice for outdoor underground gas piping because the material resists corrosion well and offers impressive strength. This affordable type of pipe is preferred by many plumbing professionals, though it’s not approved in all locations due to frequent breakage during installation.
Copper pipes generally have a lifespan of about 20 years and come with strict code limitations that restrict them in many parts of the country. Some municipalities have gone so far as to ban them entirely.
Flexible Corrugated Stainless Steel Tubing can be an ideal solution in confined spaces or in places where natural disasters are more likely to occur. Despite being easy to install and highly flexible, this type of tubing is still prone to cracking, so it should only be used indoors.
How Gas Piping Systems Work
Gas piping systems function by utilizing pressure differences to carry natural gas into a property. Within these systems, the gas flows from high to low pressure levels, moving through various pipes, into a pressure regulator, passing into your home’s distribution system, and then reaching individual appliances. The natural gas originates from utility-operated mainlines, then continues through service lines, both of which are maintained by your local gas provider. All sections of the system found downstream – meaning on your private property – are solely yours to maintain and monitor. When a gas device such as a furnace or a stove is turned on, the gas pressure slightly increases beyond the air pressure, which causes the unit to ignite.
Toilet Installation
When you reach out to our Gold Canyon plumbing service for a toilet replacement, we start by removing the existing toilet from your bathroom. Next, our technicians examine the flange condition, install a new wax ring, and place the new toilet securely on the flange. We then bolt the toilet down and install the seat, lid, and tank carefully to complete the setup. Leak testing follows this process to confirm there are no issues with water escaping. Toilets with special features, including wall-mounted styles, bidets, or models equipped with electrical elements like heated seats, will require further installation work.
Our plumbers can install all toilets, including:
Two-Piece
One-Piece
Comfort-Height
Gravity-Fed
Wall-Hanging
Dual-Flush
Double-Cyclone
Waterless
Pressure-Assisted
And More!
Got Toilet Problems?
If the issue is a…
…clogged or slow-flushing toilet, your first step should be to try clearing it with a plunger. If you can’t get it cleared that way, your Gold Canyon plumbing contractor may need to come in with a plumbing snake to remove the blockage. Over time, a buildup of rust, lime, calcium, and/or debris can cause older toilets to develop a consistently weak or “lazy” flush. If that buildup is what’s causing your plumbing problem, we may advise installing a replacement toilet.
…toilet that keeps running, there might be a problem with the flush valve located at the tank’s lower section. A frequently encountered issue is also a fill valve that has malfunctioned or slipped out of place.
…tank-to-toilet leak, you’ll likely find water emerging from the seam where the toilet tank and bowl connect. Fixing this requires your plumber to shut off the water, remove the tank carefully, and install a replacement gasket.
…leak at the toilet base, the issue likely lies with a wax ring that is faulty, incorrectly installed, or degraded from age. You might see water leaking immediately after each flush, or it may gather slowly as the hours pass. For this plumbing repair, our process involves draining the toilet, uninstalling it completely, and then installing a new wax ring. Depending on the leak’s origin and how severe it is, a new tank and toilet may be necessary.
…leaking water supply, you might recognize signs such as a steady increase in your utility bill, noisy pipes, still water in or around the property, or noticeably weaker water flow. Once the main valve is turned off, call us for plumber services, because even small leaks can lead to major complications in a hurry.
…toilet overflow, you’ll want to contact our plumbing service right away before the situation becomes more severe. A few of the top causes behind this issue include a blocked sewage line, a clogged pipe, a backed-up vent, or a full septic tank. Toilets generally have a valve near the tank, and turning that off will help halt the water. When that valve can’t be found, it’s important to shut off your home’s main water line. Avoid turning the supply or valve back on until the repairs are complete.
Got Low Water Pressure?
The problem might be the result of…
…your main house shutoff valve or water meter valve being only partially open. The water meter valve, which belongs to the local water utility, regulates the volume of water entering your property from the main supply line. Usually, the main shutoff valve is located inside your home near where the city water pipe connects to your plumbing network. If either valve is not fully opened, it will cause a noticeable drop in water pressure throughout your home. Once you have confirmed your main shutoff valve is completely open, reach out to the city to have the water meter valve inspected for possible issues.
…local regulations have changed. Regulatory requirements for water systems can be altered at any time, compelling water suppliers to adjust their operations accordingly. Upon confirming such a change has taken place in your city or town, you may want to speak with your plumber about adding a water pressure booster. Prior to expertly installing the booster system, we will conduct a thorough examination of your plumbing to rule out any other potential issues.
…corroded pipes. The longer pipes have been installed, the more likely corrosion is to appear, but diagnosing it requires the expertise of a reliable plumber. If your plumbing includes copper piping more than 50 years old, brass pipes past 40 years, or galvanized steel pipes over 20 years in age, corrosion is likely the culprit behind your water pressure issues.
…a faulty fixture. When every fixture in your home shows low water pressure, it’s improbable that the fixtures themselves are causing the issue. However, if only one faucet, for instance, experiences low pressure, that specific fixture is likely responsible, either because of a clog, buildup, or simply needing replacement to fix the problem.
…leaky pipes. There are many different types and sizes of leaks, all of which cause water to be redirected away from its intended path and lead to lower water flow. Watch for signs such as wet spots or puddles forming, and contact AZ Emergency Plumbing quickly so the problem can be stopped before it grows more serious and costly.
…a failing pressure regulator. Pressure regulators aren’t a standard feature in every property. If you do have one installed, measuring your water pressure with a gauge will provide you an exact figure of the current pressure level. A gauge reading that is lower than expected strongly suggests the regulator is defective. Moreover, if the gauge shows no reading whatsoever, that too signals there’s a fault. A plumber can help you easily identify the issue and replace the regulator if it’s determined to be faulty.
…a problem with your water supplier. If the same pressure problem affects surrounding homes or nearby businesses, it’s possible the supply is causing the trouble. In this situation, get in touch with the water provider and inform them that you along with your neighbors are all facing this concern.
Got Leaky Pipes?
The problem could be caused by…
…a crack in the plumbing fixture. Physical impacts tend to be the leading cause of this type of leak. When that’s the cause of the issue, you’ll likely find noticeable damage to either the fixture or the associated pipes.
…improperly laid pipes. Major, urgent leaks in your pipes may occur if a licensed plumber didn’t install your system or if the job was not completed correctly. Water flow and gravity require careful and precise assembly of every connector and pipe section. A technician from AZ Emergency Plumbing would be happy to inspect your plumbing setup to confirm whether the installation was done properly and up to code.
…ground movement. Earthquakes, flooding, and other environmental disturbances can cause the earth beneath your property to move, which may lead to pipes bending, cracking, twisting, or separating. If there’s an underground leak, your water pressure could drop, or your drains might become sluggish. Only a skilled plumber can examine your system accurately to verify or dismiss this type of damage.
…loose water connectors. The connection points between water supplies and appliances, often made up of hoses and pipes, can loosen because of movement or shifting, causing leaks that require prompt fixing. These connectors might also sustain damage, with typical symptoms including puddles near the appliance or water dripping from the supply line.
…clogged lines. Clogs might result from multiple causes, like air handler drain pan obstructions, accumulation of hair, chemical build-up, gutter debris, and other contributing factors. If your drains won’t clear, pipes burst without freezing, or toilets overflow, it often indicates the presence of a serious clog within your plumbing lines.
…corrosion. Plumbing systems are made up of many different parts that naturally weaken and degrade as time passes. Rust and other kinds of corrosion (often caused by minerals or an improper pH balance) gradually deteriorate pipes and cause leaks to form. Typically, galvanized steel pipes last about 20 years, while brass pipes can endure for as long as 70 years. When your water has an unusual odor, discoloration, or a bad taste, it’s a likely sign that corrosion is present in your pipes.
…intrusive tree roots. Roots from trees form complex and widespread systems that can penetrate deeply beneath the ground and throughout the soil, making it easy for them to invade water lines. If trees are located near your home, you notice a drastic loss in water pressure, detect wet spots on your property, or identify a sinkhole appearing in your yard, your plumber must perform a thorough evaluation.
…pipe joint damage. The many components that form pipe joints and the continual flow of water through them make these joints highly prone to damage. Joint failure can result from extreme temperature changes, aging pipes, or too much water pressure stressing the connections. If banging or ticking noises occur, particularly during hot water use, the source is probably a compromised pipe joint needing attention.
…a broken seal. Rubber sealant is carefully applied by contractors at all appliance connection points during installation to create a watertight barrier, but as time passes, the sealant can deteriorate. You may notice condensation on the appliance or water pooling around it, indicating a compromised seal.
…high water pressure. Although pipes are designed to be durable, they are susceptible to leaks if high water pressure persists. When pressure exceeds 60 psi, pipes may even rupture and burst. If you don’t know why your leak is happening, your plumber will measure the water pressure during a detailed inspection.
Whole Home Water Filtration
Benefits
Bringing a whole-house water filtration system into your home opens the door to several worthwhile benefits. These systems provide great-tasting and clean drinking water while removing the anxiety that comes from harmful contaminants possibly being present. By eliminating the need for single-use plastic bottles, you’ll save a considerable amount of money and reduce your environmental impact at the same time. In addition, they help reduce limescale along with various mineral buildups, which helps avoid potential plumbing breakdowns and the expensive repairs that follow. You’ll enjoy cleaner laundry, need less soap overall, and your skin will benefit from being exposed to fewer irritating substances. Overall, a whole-house water filtration system is a thoughtful investment for your health, comfort, and the world around you.
The Filtration Process
Most houses are connected to a nearby municipal water supply. That water goes through a treatment facility where it’s filtered through sediment pre-filtration, carbon filtration combined with copper-zinc KDF, and post-filtration that boosts its safety and quality. Water filters installed in the home help eliminate herbicides, PFOS, hard minerals, pesticides, heavy metals, contaminants, and PFOA from your water. Clean water improves health and protects faucets, plumbing, and water-using home appliances from premature wear.
How We Install a Garbage Disposal
- Turn off the circuit breaker and carefully complete the electrical wiring for the disposal.
- Install the drain flange securely in place as a base for mounting.
- Install the gasket and mounting ring correctly to prevent leaks.
- Prop and mount the disposal unit firmly onto the flange assembly.
- Use pipe connectors to connect the disposal outlet with the P-trap discharge pipe.
- Tighten every fastener at both mounting and plumbing connections, then test for leaks by running water and running the disposal.
Got Kitchen Problems?
If the issue is a…
…slow sink drain, grease accumulation, food particles, soap scum, or a trapped object is likely blocking the pipe. To fix this blockage, our plumbers typically open the drain trap and snake the pipe to clear whatever is causing the slowdown.
…dripping kitchen faucet, the likely (and simple) fix is a cartridge replacement. Most kitchen faucets now contain a single cartridge valve, which manages the flow of both hot and cold water. Changing this component normally stops the faucet from dripping.
…water leak on the cabinet under your sink, a leak at the joint of the drain pipe is the most likely culprit. This issue could also stem from defective water supply connections on the faucet itself. Many modern kitchen faucets feature flexible hoses that connect the faucet to the supply lines. Because these fittings are typically hand-tightened, there is potential for human error during installation or maintenance. Furthermore, splashed water often finds its way into the cabinet below when seals or caulking become faulty or worn.
Five Most Common Plumbing Pipe Materials
Copper Piping is widely used in household water supply systems and is frequently chosen for its performance. Because it’s durable, safe from chemical leaching, and simple to cut, it’s often found in showers, sinks, and tubs. However, its higher cost is something many homeowners must consider when planning plumbing upgrades or repairs.
Cast Iron Piping may still be present in your home if it dates back to the 1970s or 1980s, when this material was regularly used for underground waste and sewer lines. Cast iron was once favored for its strength, suitability for large-scale use, and ability to resist impact. Cast iron has since fallen out of use because it corrodes, weakens with time, can cause severe backups, is hard to manage, and leaves homeowners with expensive bills insurance won’t usually handle.
PVC Piping is commonly installed in waste line systems due to its reliability and ease of use. It remains more popular than galvanized steel because it’s both tough and inexpensive. However, it’s not meant to handle high-pressure plumbing applications of any kind.
CPVC Piping (chlorinated polyvinyl chloride piping) is formed from a strong polymer material and is considered superior to copper piping in a few key ways. It resists corrosion and installs more easily and quickly, making it a favorite among some licensed plumbers. Still, it has its downsides – CPVC pipes are brittle, expensive compared to typical PVC, sensitive to high heat, and not well-suited for locations with extreme or rapidly changing temperatures.
PEX Piping offers remarkable flexibility, durability, minimal need for fittings, affordability, and a strong build that supports many types of installations and makes it incredibly popular in modern plumbing. Because of these advantages and its suitability for many projects, licensed plumbers often choose PEX over more rigid alternatives. Water lines are easily identified by color: blue PEX is used for cold water, white PEX accommodates both temperatures equally well, and red PEX is assigned to hot water.
All About Frozen Pipes
How to Prevent Frozen Pipes
Taking early preventative steps is the best way to avoid frozen pipes and costly problems like burst or leaking pipes.
We recommend:
Before temperatures drop, shut off outdoor spigots and drain water from lines
Keeping your heater on (55 degrees or higher)
Ask your plumbing contractor to insulate your water tank and pipes
Run your faucets regularly
Keep under-sink cabinet doors open to keep pipes warm
Drip cold water in the faucet farthest from the main valve to keep water moving
How to Thaw Frozen Pipes
- Ask your neighbors whether they’ve noticed any frozen pipes at their home. If they’re affected too, it may indicate a larger issue like a water main break – not just frozen plumbing in your home.
- Shut off the water to your house using the main supply valve.
- Open all the faucets in your house to release pressure from the pipes.
- Warm pipes and their surroundings with a hair dryer, taking care to avoid flammable objects.
- Slowly turn the main valve back on and watch for leaks or standing water.
If thawing the pipes on your own hasn’t worked, if you feel hesitant to handle it yourself, or if you believe a pipe has cracked or completely burst, it’s time to call your go-to 24/7 plumber at 480-547-9517. There are numerous hazards that come with thawing pipes without help, such as warping or breaking the pipe (if too much heat is applied too fast), missing a crack or leak (which can lead to water damage), and other possible risks. Your emergency plumber will show up promptly, assess the situation thoroughly, and start thawing and repairing your pipes without delay.
How Our Insured Plumbers Insulate Pipes
The first step your local plumbers in Gold Canyon will take is to assess your home’s existing plumbing layout, since every system is uniquely designed. In most cases, we’ll install pipe insulation around plumbing that runs through unheated attics, walls exposed to the outside, and crawl spaces. Depending on your home’s layout and needs, we may also recommend using heat tape or cables.
What to Do When Your Pipes Freeze
The first thing to do when you discover your pipes are frozen is to shut off the water at the main valve to prevent further damage. After that, you can decide to either attempt to thaw the pipes on your own or call your local plumbers for professional service. If you think the water meter is frozen, do not try thawing it yourself as it could cause serious damage. Instead, get in touch with your water company. The best approach is to act quickly – contact your favorite plumber at AZ Emergency Plumbing immediately when you recognize frozen pipes to avoid costly pipe bursts or cracks.
Where and When Pipes Typically Freeze
Attics, crawl spaces, and outer walls are especially susceptible to freezing pipes. Although water may freeze in a pipe at 32 degrees, the most severe risk begins when outdoor temperatures fall beneath 20 degrees. Pipes are far more likely to burst during long periods of harsh cold. In some cases, water can freeze inside pipes in just six hours.
To learn more about our premier plumbing services or to dispatch us for emergency plumbing assistance, reach out to AZ Emergency Plumbing today at 480-547-9517.
